AncheeNEW
ZEALAND
Find my size ↗Find a retailer ↗

ANCHEE / TYRE SIZE FINDER

Your next tyre
starts with your size.

Find matching patterns across the New Zealand range. Use the size on your tyre’s sidewall, then check the load rating, speed rating and construction your vehicle needs.

Try 2055516, 205/55R16 91V, AC858 or all terrain. Results are catalogue listings; ask a retailer about stock.

Loading the NZ range…

A matching size alone does not confirm vehicle suitability. Check load and speed requirements, run-flat compatibility and any different front/rear fitments.

ANCHEE / YOUR NEXT STEP

Find your next set.

Talk to a retailer about tyre choice, pricing, availability and fitting. For NZ supply or product support, contact the Traction Tyres team.

Find a retailer ↗Contact / NZ support ↗

KNOW YOUR SIZE

Look on your tyre’s sidewall.

Find a marking like the example below on the side of your tyre.

205/55 R16
205
Width — the tyre’s nominal width in millimetres.
55
Profile — sidewall height as a percentage of the width.
R
Construction — R means radial.
16
Wheel size — the wheel diameter in inches.

Enter 205/55R16 or 205 55 16 in the size finder.

Different markings or a 4WD size?

Some tyres use an inch-based size such as 31x10.50R15: nominal diameter, width and wheel diameter, all in inches. Enter the complete size as shown. Commercial sizes such as 195R14 are also supported.

Letters such as LT, XL or run-flat markings describe additional requirements. The numbers and letter after the size, such as 91V, are load and speed ratings. Check these against your vehicle’s requirements too.

Check the vehicle’s tyre placard or handbook as well as the current tyres. Front and rear sizes can differ. Your retailer can confirm the right fitment.